Ram 3500 ABS and stability control problems: what 610 owners reported
Ram 3500 owners have filed 610 NHTSA complaints about ABS, traction control or stability control warnings or faults. That is 25.9% of all 2,357 complaints on file for the model. The reports are heavily concentrated in two model years: 116 for 2017 and 453 for 2018, together 569 of the 610. Smaller numbers exist for almost every other year from 2013 to 2026.
As of the data date in this guide (16 November 2026), NHTSA's recall data for these model years has no recall matching this problem in our records. One 2018 owner does cite a recall number in their complaint, so check your own VIN. If this is not your case, read the full Ram 3500 problem report.
TL;DR
- 610 complaints mention ABS, traction or stability control problems, 25.9% of the 2,357 Ram 3500 complaints.
- 2018 has 453 reports (56.0% of that year's 809 complaints) and 2017 has 116 (36.6% of 317).
- Owners often say the ABS warning also switches off traction control, stability control, cruise control, 4WD and trailer brakes.
- Component labels named most often: Service Brakes (587), Hydraulic (132), Electrical System (100), Vehicle Speed Control (90).
- 7 reports mention a crash and 2 mention a fire. The reports list 0 injuries.
- No recall matching this problem is listed in the data for these model years.
Which Ram 3500 years have the most ABS and stability control complaints?
| Model year | Reports | All complaints | Share |
|---|---|---|---|
| 2026 | 4 | 29 | 13.8% |
| 2025 | 1 | 43 | 2.3% |
| 2024 | 3 | 46 | 6.5% |
| 2023 | 0 | 17 | 0.0% |
| 2022 | 4 | 191 | 2.1% |
| 2021 | 2 | 63 | 3.2% |
| 2020 | 4 | 116 | 3.4% |
| 2019 | 5 | 138 | 3.6% |
| 2018 | 453 | 809 | 56.0% |
| 2017 | 116 | 317 | 36.6% |
| 2016 | 2 | 134 | 1.5% |
| 2015 | 7 | 137 | 5.1% |
| 2014 | 7 | 202 | 3.5% |
| 2013 | 2 | 115 | 1.7% |
The 2017 and 2018 trucks stand out: more than half of all 2018 complaints are about this symptom. Every other year has 7 reports or fewer. The 2026 share (13.8%) looks high, but it rests on 4 reports out of 29 complaints, and newer trucks have had less time on the road to collect complaints, so I would not read much into it either way.
What do Ram 3500 owners describe?
Several systems switch off together. Owners say an ABS fault takes other features with it. A 2024 owner wrote that the warning "also disables 4 wheel drive, electronic stability control, cruise control and trailer brakes" (NHTSA complaint 11768900). A 2014 owner said "ABS control deactivates traction control, as well as trailer breaks, and effects transmission functions as well" (11647288). A 2015 owner reported that "Cruise control and 4x4 will not engage due to this issue" (11613890).
Towing makes it worse. The 2024 owner said it happened "while towing a 16,000# trailer which caused vehicle control issues when braking" (11768900). The 2014 owner called it "dangerous" when towing an RV without trailer brakes (11647288).
Hydraulic control unit and ABS module. A 2021 owner wrote that "the ABS and the HCU (Hydraulic Control Unit) need to be replaced" after the dealer read the codes (11662300). A 2018 owner said the HCU was replaced in 2022 and "By 2024 the system had failed again" (11764122). A 2017 owner described a replaced pump and an HCU, yet "the ABS system still has an active fault code C2200-49" (11774293).
Recurring or intermittent. A 2025 dual rear wheel owner said the dealership "has tried to fix these issues 8 or more times, with no success" (11699680). A 2026 owner reported a U1412 code three times on a truck less than 6 months old (11732296).
Parts availability. A 2014 owner wrote "ABS is not working and no part is available" (11647288). A 2020 owner wrote "Parts have been discontinued and new ones are not available yet" (11531055).
Other findings. A 2022 owner said the dealer blamed the HPU, but "all the fuses in the fuse box were loose. I pushed them in to reseat and the error cleared" (11710526). This is one owner's account, not a confirmed cause. A 2024 owner said the ABS shutdown "was determined to be code: C0037-2F (Left Wheel Speed Sensor Signal Erratic)" (11768900).
The most serious report in the set is a 2013 owner (11218887) who said the ABS warning light came on at 55 mph, the truck shook violently, and afterwards the wheel was found separated from the axle, with smoke from the tyre. That complaint reports no injuries and no diagnosis, so I would not treat it as typical. Across the whole set, 7 reports mention a crash and 2 mention a fire.
Is there a recall for ABS and stability control on the Ram 3500?
The data behind this guide lists no recall matching this problem for the Ram 3500 model years above. That does not mean none applies: recalls for other parts may still affect your truck.
One 2018 owner wrote of "a safety recall in 2024" with "the NHTSA recall number is 24V – 896", and said the dealership told them "there are no parts available" (11765209). I have not been able to match that campaign to this symptom, and the owner's description names 4500 and 5500 class trucks being worked on first. Treat it as a reason to check your VIN, not as confirmation.
What should you do if your Ram 3500 shows ABS or stability control warnings?
- Check open recalls for your VIN at NHTSA recalls.
- Ask a dealer to read the fault codes and to check for open recalls and manufacturer service bulletins.
- Write down the date, mileage, warning messages, speed, weather and whether you were towing. Note the exact codes if the dealer gives them.
- Report the problem at NHTSA's safety problem page. Reports are how the numbers above get built.
- If you tow, remember several owners say trailer brakes switch off with the ABS warning. I would not tow a heavy trailer with these warnings on until a dealer has checked the truck.
- If the truck behaves unsafely in traffic, stop somewhere safe and call for help.
How this guide was made
The data comes from NHTSA owner complaints, matched to this symptom by the wording of each complaint, and the brief date is 16 November 2026. Quotes are as filed, with capitals changed to normal sentence case where the original was all capitals. Method details are on the methodology page.