Fault Code Lookup › Powertrain codes › P0805
P0805 Powertrain · generic OBD-II
Clutch Position Sensor Circuit
P0805 is a standard code covering engine, transmission, fuel and emissions. It names the system that logged the fault, not the part that failed. Below: which cars owners reported it on, what happened, and recalls on those cars, from 7 complaints filed with NHTSA. Updated November 9, 2026.
- 7owner reports
- 1car model
- 0mention a crash
- 0mention a fire
- 2012–2017model years
Which cars get code P0805?
Every model whose owners mentioned P0805 in a complaint, most reports first. Each year opens that car's full problem report. Popular models collect more reports because more of them are on the road.
Where does P0805 show up?
By brand
- Ford7
Component the owner filed it under
Is there a recall for P0805?
The others concern the component owners file this code under (Power Train) on the same cars; they may or may not relate to the code. Recall repairs are free; check your VIN at nhtsa.gov/recalls.
Power Train: Manual Transmission Ford Motor Company (Ford) is recalling certain 2015-2018 Focus and 2013-2016 Fusion vehicles previously repaired incorrectly under recall numbers 18V169 and 18V845. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
2017 Ford Focus, 2016 Ford Focus. Full risk and remedy on each car's report.
Power Train: Manual Transmission Ford Motor Company (Ford) is recalling certain 2016-2018 Ford Focus vehicles equipped with a 1.0L Fox GTDI engine and a 6-speed manual transmission. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
2017 Ford Focus, 2016 Ford Focus. Full risk and remedy on each car's report.
Power Train: Manual Transmission Ford Motor Company (Ford) is recalling certain 2013-2014 Ford Fusion vehicles equipped with a 1.6L GTDI engine and 6-speed manual transmission and 2015-2016 Ford Focus vehicles equipped with a 1.0L GTDI engine and 6-speed manual transmission. Also included are four 2017 Ford Focus vehicles that had…
2016 Ford Focus. Full risk and remedy on each car's report.
What happened when owners saw P0805?
7 of the 7 reports, spread across the models above, as the owners wrote them. NHTSA removes names and VINs; long reports are trimmed. CarHooq has not verified individual claims.
…The contact noticed that the code on the vehicle before repairing P0805 and were part of recall # 18V845000, wondering why when contacting Ford, they said there was not a recall for the transmission.
The transmission on our 2013 has now failed. We brought it to Ford’s attention back During the Covid shut down before The Focus reached the 100,000 mile expiration. Ford said there’s nothing they can do about it. We gingerly drove the car to make the transmission last as long as possible and it lasted quite a while. However now the transmission has failed it and after taking the vehicle to a certified mechanic they found the DTC Code showed P0805:00-68, The description was clutch position sensor A circuit, and the status was continuous memory DTCs, another code PC805 had a similar description and a status of “freeze frame module2”. Certified mechanic check this out and reported this…
…too much for my budget so I purchased two actuators from Ebay after waiting a week for them to be delivered I installed them and it did not work same problem check engine light stayed on and my hand held checker even after clearing the trouble code P0805 came back and here I set no car I called the ford dealership and they said it would be a month or longer before I could even get an appointment and it would cost several hundred dollars to fix my car. I am very upset over this whole ordeal. I have been looking on the internet and it appears that the 2012 Ford Focus is one of the worst vehicles and it has many problems and what I went through it is a very dangerous vehicle to be on the road!
…TOWED THE CAR TO THE MECHANIC THE NEXT DAY AND THEY RAN A DIAGNOSTIC THAT CAME BACK WITH 5 ERROR CODES INCLUDING: P0805, P087A, P2831, P2836, AND P2861. A PIN POINT TEST WAS PERFORMED AND FOUND THAT THE VOLTAGE WAS AT A CONSISTENT 5 VOLTS, SO THEY CLEARED THE CODES AND TOOK THE VEHICLE FOR A TEST DRIVE AND IT WAS FINE AGAIN. THE VEHICLE HAS ABOUT 79,000 MILES. ATTACHED WILL BE THE MECHANICS FORM ALONG WITH WHAT THEY SAID ARE SEVERAL CODES FOR RELATED RECALLS THAT WERE SUPPOSEDLY ALREADY FIXED. *TR
STARTING FEBRUARY 2018 THE CAR WAS JERKING AND IT HAD TURNED OFF ON ME WHILE ON THE HIGHWAY 3 TIMES. I HAVE CHANGED OXYGEN SENSORS AND PURGE VALVE (I HAVE RECEIPTS) AND IT HAD INITIALLY HELPED. AS OF JUNE 2, 2018, IT IS JERKING AND TURNING OFF AGAIN AND THROWING CHECK ENGINE CODE P0805 AND P080A. THE SYSTEM FROM CAR NOTIFIED ME THAT THE TRANSMISSION WAS HOT AND NEEDED TO BE TURNED OFF. FROM JUNE 2, 2018 I HAVE NOT DRIVEN THE CAR.
The contact owns a 2016 Ford Focus. The contact stated while driving at an undisclosed speed, the vehicle downshifted with the check engine warning illuminated. The vehicle was towed to the dealer where it was diagnosed that the clutch actuator had failed and needed to be repaired to verify if the transmission might have failed. The contact stated that the dealer provided the contact with the following error DTC codes: P0704, P2701, and P0805 after the vehicle had been diagnosed. The vehicle was not repaired. The manufacturer was made aware of the issue and referred the contact to the NHSTA Hotline for assistance. The approximate failure mileage was 114,000.
The contact owns a 2014 Ford Focus. The contact stated while driving at slow speeds, the transmission overheated and failed to allow the vehicle to accelerate. The vehicle was taken to the dealer to be diagnosed and produced code: P0805 P0809. The contact was informed of Manufacturer Recall Number: 19N08 (PCM). The vehicle was repaired; however, after the vehicle was retrieved, the failure recurred. The vehicle was taken back to the dealer where it was diagnosed and determined that the battery needed to be replaced. The vehicle was repaired however, the failure recurred. The vehicle was not repaired a third time. The manufacturer was notified of the failure and the contact was advised to…
P0805: questions drivers ask
What does code P0805 mean?
P0805 is a generic OBD-II powertrain code. Its standard definition is "Clutch Position Sensor Circuit". The code tells you which system set the fault, not which part failed; the owner reports on this page show what it meant in practice for 1 car model.
Which cars get code P0805 most often?
In NHTSA owner complaints, P0805 is mentioned most for the Ford Focus (7), across 1 model and model years 2012 to 2017. Popular models collect more reports because more of them are on the road.
Is there a recall for code P0805?
No NHTSA recall text names P0805 directly. 3 recalls on the cars that report this code concern the same component owners name most (Power Train); they may or may not relate to the code. Check your VIN at nhtsa.gov/recalls.
What should I do if my car shows P0805?
Write down when the code appeared and what the car did (warning lights, loss of power, noises, speed, weather). Check your VIN for open recalls at nhtsa.gov/recalls, ask a dealer or independent workshop to read the stored freeze-frame data before anyone clears the code, and keep the repair order. If the car loses power in traffic, stop driving it. CarHooq does not diagnose: these are owner reports and official recall notices, not repair advice.
How this page was made
CarHooq read the text of every owner complaint filed with NHTSA for 19 US and European brands (model years 2012 onwards) and picked out the diagnostic trouble codes owners wrote down. This page lists every mention of P0805. The definition is the generic SAE J2012 wording; a carmaker may use the code slightly differently. Nothing here is a diagnosis. More answers: the fault code FAQ. Data: NHTSA Office of Defects Investigation (public domain), retrieved November 9, 2026. How CarHooq reports are made.
Is something missing or wrong on this page? Tell CarHooq. One line is enough; every message is read.
Look up another code
Or check a car: Problem Lookup · Used-car checker