Fault Code Lookup › Network codes › U0126
U0126 Network · generic OBD-II
Lost Communication With Steering Angle Sensor Module
U0126 is a standard code covering network: communication between the car's control modules. It names the system that logged the fault, not the part that failed. Below: which cars owners reported it on, what happened, and recalls on those cars, from 5 complaints filed with NHTSA. Updated November 16, 2026.
Owners also write it as U012600 (the last two characters are the sub-code).
- 5owner reports
- 3car models
- 0mention a crash
- 0mention a fire
- 2014–2019model years
Which cars get code U0126?
Every model whose owners mentioned U0126 in a complaint, most reports first. Each year opens that car's full problem report. Popular models collect more reports because more of them are on the road.
Where does U0126 show up?
By brand
- Chevrolet3
- Mercedes-Benz1
- Jeep1
Component the owner filed it under
Is there a recall for U0126?
As of November 16, 2026, no NHTSA recall on the cars reporting U0126 names this code or its most-reported component. Recalls can be issued at any time: check your VIN at nhtsa.gov/recalls.
What happened when owners saw U0126?
5 of the 5 reports, spread across the models above, as the owners wrote them. NHTSA removes names and VINs; long reports are trimmed. CarHooq has not verified individual claims.
…Codes present from BCM are U0422 invalid data received, U1509, U0415, U0073, U0077, U0126, U0151. Service representative at dealer confirmed that Onstar will cause other problem do to error communication. Onstar device can shut down your vehicle. Electronic and computer problem can be unsafety on your vehicle. Onstar as well as Chevrolet/GM know that this is causing electrical problem but recommend to contact other shops to see if they can by pass that error and won’t take responsibility of what their are causing to all vehicles with 2G network
…ABS Module DTC's: -C2200 -U0100 -U0141 -U0126 -U0002 While scanning the module comes and goes offline.
The vehicle is shifting into neutral when putting it into drive. I was told the transmission valve body broke and transmission control unit for 9-speed transmission (VGS) has to be replaced. The fault codes include P073E00, gear cannot be engaged, and U012600, Communication with the steering column module has a malfunction. The vehicle only has 77,488 miles on it.
TL* THE CONTACT OWNS A 2014 CHEVROLET SILVERADO 1500. WHILE DRIVING 45 MPH, THERE WAS A CLICKING AND BANGING NOISE COMING FROM THE FRONT DIFFERENTIAL. THERE WERE NO WARNING INDICATORS ILLUMINATED. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE THE FOLLOWING DIAGNOSTIC CODES APPEARED: C0035, C0040, C0050, UO077, U0126, UO151, UO422, UO401 AND UO415. THE VEHICLE WAS NOT REPAIRED. THE CONTACT LATER TOOK THE VEHICLE TO DELLENBACH CHEVROLET (LOCATED AT 311 S COLLEGE AVE, FORT COLLINS, CO 80525, (888) 283-6441) AND WAS PROVIDED THE CODES. THE VEHICLE WAS IN THE PROCESS OF BEING REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND PROVIDED CASE NUMBER: 9-5332168571. THE APPROXIMATE…
WHILE I WAS DRIVING MY STABILTRAK LIGHT CAME ON. I TOOK IT TO THE DEALER THAT TOLD ME THE UO126 AND CO544 SETTING FOUND POWER STEERING MODULE NOT COMMUNICATING AND THAT I NEEDED TO REPLACE THE ENTIRE MODULE FOR THE SHORT IN THE WIRE. AFTER TALKING TO SEVERAL DEALERS I WAS TOLD THAT SEVERAL PEOPLE HAVE HAD SIMILAR ISSUES. I HAVE HAD SIMILAR ISSUES WITH OTHER CHEVY'S SUCH AS MY 08 COBALT WHERE THERE WAS A RECALL WITH THE POWER STEERING TURNING OFF. *TR
U0126: questions drivers ask
What does code U0126 mean?
U0126 is a generic OBD-II network code. Its standard definition is "Lost Communication With Steering Angle Sensor Module". The code tells you which system set the fault, not which part failed; the owner reports on this page show what it meant in practice for 3 car models.
Which cars get code U0126 most often?
In NHTSA owner complaints, U0126 is mentioned most for the Chevrolet Silverado (3), Jeep Wrangler (1), Mercedes-Benz GLE-Class (1), across 3 models and model years 2014 to 2019. Popular models collect more reports because more of them are on the road.
Is there a recall for code U0126?
As of November 2026, no NHTSA recall on the cars reporting U0126 names this code or its most-reported component. Recalls can be issued at any time, so check your VIN at nhtsa.gov/recalls.
What should I do if my car shows U0126?
Write down when the code appeared and what the car did (warning lights, loss of power, noises, speed, weather). Check your VIN for open recalls at nhtsa.gov/recalls, ask a dealer or independent workshop to read the stored freeze-frame data before anyone clears the code, and keep the repair order. If the car loses power in traffic, stop driving it. CarHooq does not diagnose: these are owner reports and official recall notices, not repair advice.
How this page was made
CarHooq read the text of every owner complaint filed with NHTSA for 19 US and European brands (model years 2012 onwards) and picked out the diagnostic trouble codes owners wrote down. This page lists every mention of U0126 (including sub-code forms such as U012600). The definition is the generic SAE J2012 wording; a carmaker may use the code slightly differently. Nothing here is a diagnosis. More answers: the fault code FAQ. Data: NHTSA Office of Defects Investigation (public domain), retrieved November 16, 2026. How CarHooq reports are made.
Is something missing or wrong on this page? Tell CarHooq. One line is enough; every message is read.
Look up another code
Or check a car: Problem Lookup · Used-car checker